奥林巴斯A309S-SU水浸探头；奥林巴斯A309S-SU标准外壳水浸探头；奥林巴斯A309S-SU大直径外壳水浸探头；奥林巴斯A309S-SU细长线外壳水浸探头；奥林巴斯A309S-SU**代理价格优惠；奥林巴斯A309S-SU销售专线13530838910
A309S-SU|奥林巴斯A309S-SU水浸探头
A309S-SU|奥林巴斯A309S-SU水浸探头
A309S-SU|奥林巴斯A309S-SU水浸探头
A309S-SU|奥林巴斯A309S-SU水浸探头
A309S-SU|奥林巴斯A309S-SU水浸探头
A309S-SU|奥林巴斯A309S-SU水浸探头
Immersion Transducers
An immersion transducer is a single element longitudinal wave transducer with a 1/4 wavelength layer acoustically matched to water. Immersion transducers are specifically designed to transmit ultrasound in applications where the test parts are partially or wholly immersed in water, which allows a uniform and fast coupling technique for rapid scanning of parts. Focusing lens can be added to increase transducer sensitivity and performance in a particular area of a part. Immersion transducers can be focused either spherically or cylindrically upon request within the allowable focal range for a given frequency and element size.
Advantages:
-
The immersion technique provides a means of uniform coupling
-
Quarter wavelength matching layer increases sound energy output
-
Corrosion resistant 303 stainless steel case with chrome-plated brass connectors
-
Proprietary RF shielding for improved signal-to-noise characteristics in critical applications
-
All immersion transducers, except paintbrush, can be focused spherically (spot) or cylindrically (line) (see Technical Notes page 45)
-
Customer specified focal length concentrates the sound beam to increase sensitivity to small reflectors
Applications:
-
Automated scanning
-
On-line thickness gaging
-
High speed flaw detection in pipe, bar, tube, plate, and other similar components
-
Time-of-flight and amplitude based imaging
-
Through transmission testing
-
Material analysis and velocity measurements
Usage Note: Transducers should not be submerged for periods exceeding 8 hours. Allow 16 hours of dry time to ensure the life of the unit.
Immersion Transducers
An immersion transducer is a single element longitudinal wave transducer with a 1/4 wavelength layer acoustically matched to water. Immersion transducers are specifically designed to transmit ultrasound in applications where the test parts are partially or wholly immersed in water, which allows a uniform and fast coupling technique for rapid scanning of parts. Focusing lens can be added to increase transducer sensitivity and performance in a particular area of a part. Immersion transducers can be focused either spherically or cylindrically upon request within the allowable focal range for a given frequency and element size.
Pencil Case
-
Small diameter, 2" (51 mm) long barrel improves access to difficult-to-reach areas
-
Standard connector style is Straight UHF (SU)
Transducer Configurator
*Please select a specific focus between min max.
**If a focus is required, select a focal length between min max
To view point target foci, click here.
Slim Line Case
-
Stainless steel case is only 0.38" (10 mm) in diameter, ideal for limited access areas
-
Standard configuration is Straight and fits Microdot ® connector style
i-1 and i-2 Style Housings
0.25 inches (6 mm) diameter elements with 0.375 inches (10 mm) housings for difficult to reach fillet or bore areas are available with straight Microdot (I-1) or straight UHF (I-2) connectors and 303 stainless steel housings.
Transducer Configurator
*Please select a specific focus between min max.
**If a focus is required, select a focal length between min max
To view transducer point target focus, click here.
Standard Case
-
Knurled case with Straight UHF connect or (SU)
-
Contact us for nonknurled case design and availability of other connector styles
-
Frequencies ranging from 1.0 to 25 Mhz
i-3 Style Housing
0.25 inches (6 mm), 0.375 inches (10 mm) and 0.50 inches (13 mm) element diameters in 0.63 inches (16 mm) housings with straight UHF connectors and 303 stainless steel case housings. If a focus is required, select a focal length between min. and max.
Transducer Configurator
*Please select a specific focus between min max.
**If a focus is required, select a focal length between min max.
To view point target foci, click here.
Transducer Configurator
*Please select a specific focus between min max.
**If a focus is required, select a focal length between min max
To view point target foci, click here.